Slash Signature Cry Baby® Wah Wah
SW95
- Modeled after Slash's legendary wah-wah tone
- Searing high gain distortion and Fasel-loaded Classic circuit
Like the man himself, the Slash Wah from Dunlop is both revolutionary and classic, right down to its hot rod metallic red finish and cutting edge circuit design. The Slash Wah deploys a searing high gain distortion coupled with the Fasel-loaded Classic circuit for instant lead tone that not only cuts through, but sings with a sweet and lush top end. Convenient LEDs indicate distortion on/off and wah on/off modes, so there's no more guessing game every time you put your foot down. And with the batteries readily accessible from the top of the rocker pedal, you don't have to fumble with a screwdriver when it's time to re-power. So get your boot on a Dunlop Slash Wah. Top hat not included.
Power: Dunlop ECB004 AC Adapter or Two 9 volt batteries
POWER
The SW95 Slash Cry Baby® Wah Wah is powered by two 9-volt batteries (accessed via the top of the pedal), an AC adapter such as the Dunlop ECB004/ECB004E, or a DC Brick™power supply.
SETUP INSTRUCTIONS
• Run an instrument cable from your guitar to the SW95’s INSTRUMENT jack and another instrument cable from the SW95’s AMPLIFIER jack
into your amplifier’s input.
• Set VOLUME and GAIN controls to their 12 o’clock positions.
• Push the toe of the pedal down until you feel a “click” to turn the pedal on/off.
• Rotate the VOLUME control clockwise to increase volume or counterclockwise to decrease it.
• To engage the SW95’s distortion circuit, push in the red DISTORTION switch.
• Rock your foot back and forth on the pedal to hear the vocal, expressive tones that the Cry Baby is famous for.
• Rotate the GAIN control clockwise to increase amount of distortion or counter-clockwise to decrease it.
CONTROLS
• VOLUME knob controls overall
effect volume
• GAIN knob controls overall amount
of distortion
• DISTORTION switch toggles distortion
effect on/off (red LED indicates on)
• FOOTSWITCH toggles pedal on/off
(blue LED indicates on)
SPECIFICATIONS
Impedance
Input 1 MΩ
Output 4.7 kΩ
Nominal Input -8 dBV
Max Output +7 dBV
Noise Floor* < -94 dBV
Center Freq. (fc)
Heel Down 270 Hz to 370 Hz
Toe Down 1.5 kHz to 1.9 kHz
Max Gain at fc 20 dB
Bypass True Hardwire
Current Draw18 mA
Power Supply 18 volts DC
