Dunlop CRYBABY Signature Series - JC95B CANTRELL WAH-EA Pedal

Jerry Cantrell Signature Cry Baby® Wah Wah

JC95

    Modeled after Jerry Cantrell's darker, wider sounding wah-wah tone
    Side-control knob for fine tuning the toe-down frequency
    Oxidized "road worn" brass casting and custom AIC tread

One of the most influential guitarists to come out of the Seattle rock scene, Jerry Cantrell's epic riffs and searing tone have been the driving force behind Alice in Chains since the late 80's. His melancholy wah-drenched melodies in modern classics like "Man in the Box" and "The Rooster" left an indelible mark on a generation of guitarists. Jerry favored wah-wahs with a wider, darker response, and Dunlop has painstakingly replicated that moody sound to create his signature pedal. It's custom-voiced for a tight, punchy heel-down tone and a rugged side-control knob lets you fine tune the toe-down frequency. And with its antique, oxidized "road worn" brass casting and custom Alice in Chains tread, this is one pedal that looks as great as it sounds.

Power: Dunlop ECB003 AC Adapter or Single 9 volt battery

POWER

The Jerry Cantrell Signature Cry Baby® Wah Wah is powered by one 9-volt battery (accessed via the bottom of the pedal), an AC adapter such as the Dunlop ECB003/ ECB003E, or a DC Brick™ power supply.


SETUP INSTRUCTIONS

• Run a shielded instrument cable from your guitar to the JC95’s INSTRUMENT jack.

• Run another shielded instrument cable from the JC95’s AMPLIFIER jack to your amplifier input.

• Turn on the amplifier and begin playing.

• To turn the pedal on/off, push the toe of the pedal down until you feel a “click.”

• Rotate the FINE TUNE knob clockwise for a brighter toe-down response or counterclock-wise for a darker toe-down response.
 

SPECIFICATIONS

Impedance

Input 1 MΩ

Output 10 kΩ

Filter Center Frequency

Heel Down 320 Hz to 390 Hz

Toe Down Fine Tune Max 1700 Hz to 2070 Hz

Fine Tune Min 1050 kHz to 1270 Hz

Maximum Level

Input -11.5 dBV

Output +6 dBV

Maximum Gain at Center Frequency

Heel Down +18 dB

Toe Down +20 dB

Noise Floor*

Heel Down >97 dB

Toe Down >89 dB

Bypass Hardwire

Current Draw 1 mA

Power Supply 9 volts DC