Dunlop GCB95F CRYBABY Classic WAH Pedal

GCB95F Cry Baby® Classic Wah Wah

•     Features the original Italian-made Fasel inductor
•     Recreates the vocal sweep and lush harmonics from the wah's classic era
•     Unavailable for decades until today

The heart and soul of the original wah pedals was the legendary Fasel inductor, and the Cry Baby Classic has it. Why is that important? Because the Fasel inductor was the key to the gorgeous tone, voice, and sweep of those first wahs. Plus, these inductors have been unavailable for decades. Now you can get that magic tone again. Go back in time with the Cry Baby Classic with Fasel Inside. Hear what you've been missing.

Power: Dunlop ECB003 AC Adapter or Single 9 volt battery

POWER

The Cry Baby® Classic Wah Wah is powered by one 9-volt battery (accessed via the bottom of the pedal), an AC

adapter such as the Dunlop ECB003/ ECB003E, or a DC Brick™ power supply.

SETUP INSTRUCTIONS

• Run an instrument cable from your guitar to the GCB95F’s INSTRUMENT jack and run another instrument cable from the GCB95F’s AMPLIFIER jack to your amp.

• To turn the pedal on/off, push the toe of the pedal down until you feel a “click.”

• By rocking your foot back and forth on the pedal, you can change the effect that the Classic Cry Baby Wah Wah has on the tone of your instrument instantaneously.
 

SPECIFICATIONS

• Impedance
• Input 1 MΩ
• Output 1 kΩ
• Noise Floor* -102 dBV
• Bypass Hardwire
• Current Draw 2.5 mA
• Power Supply 9 volts DC