Cry Baby® Mini Wah CBM95
Half the size of a standard Cry Baby pedal
Three internally adjustable voicings
Full sweep range
True bypass switching
Don’t let its small size fool you—the CBM95 Cry Baby Mini Wah doesn’t skimp on tone or usability. It comes equipped with the legendary Fasel inductor, a full sweep range, and three internally adjustable voicings—Low, Vintage, and GCB95. At half the size of a standard Cry Baby pedal, the CBM95 is perfect wherever space comes at a premium, such as on a travel board. To top it off, this pedal features true bypass switching and high quality hardware so that it can take a beating on the road. Save precious space without sacrificing tone and put a Cry Baby Mini Wah on your pedalboard.
POWER
The Mini Cry Baby®
Wah is powered by one 9-volt battery (accessed via the bottom of the pedal), an AC adapter such as the Dunlop ECB003/ECB003EU, or a DC Brick™power supply.
SETUP INSTRUCTIONS
• Run a shielded instrument cable from your guitar to the CBM95’s INSTRUMENT jack.
• Run another shielded instrument cable from the CBM95’s AMPLIFIER jack into your amplifier input.
• Turn on the amplifier and begin playing.
• To turn the pedal on/off, push the toe of the pedal down until you feel a “click.”
• By rocking your foot back and forth on the mini pedal, you can instantaneously change the effect that the Cry Baby Wah
has on the tone of your instrument.
• Located under the rocker at the heel of the pedal is an adjustable torque clutch that allows the amount of resistance
the rocker has to being moved. Turn clockwise to increase resistance or counterclockwise to decrease resistance
(Wrench included).
• Internal VOICING switch allows you to change the frequency range of the CBM95. To access, remove bottom plate. Default setting is H—High, for the standard GCB95 sound. For a more vintage, midrange-focused sound, set the switch to M. For the lower frequency range used in our Jimi Hendrix™ Wah, select L.
SPECIFICATIONS
Impedance
Input 800 kΩ
Output 10 kΩ
Resonant Frequency
Heel Down 350 Hz - 450 Hz
Toe Down 1.5 kHz - 2.5 kHz
Maximum Level
Input -8.0 dBV
Output +10 dBV
Maximum Gain
Heel Down +19.5 dB
Toe Down +19.0 dB
Bypass True Hardwire
Noise Floor*
Heel Down -98 dBV
Toe Down -89 dBV
Current Draw 900 μA
